Stocks

Stocks

Grid List

Set Descending Direction

1-10 of 18

Page:
  1. 1
  2. 2
  1. Stripped BAD-PDW Monolithic PDW Lower Receiver + VERT Stock System

    Regular Price: $750.00

    Special Price $699.00

    STRIPPED - VERT TM PDW Lower - MODEL: BAD-PDW Monolithic PDW Lower Receiver + Stock System

    • Monolithic Design
    • Continous Cheek Weld
    • Self-Contained Ultra Compact Buffer System
    • No Special BCG Required!  *Compatible with MilSpec M16 Bolt carrier*
    • Ultra Compact Stock System 4.75" Long Fully Collapsed, 8.75" Long Fully Extended
    • Built-in Ambidextrous Bolt Release
    • Built-in Ambidextrous Magazine Release
    • Proprietary Buffer, Buffer Spring and Stock Components Included
    • Multiple Patents Pending
    • Proprietary stock assembly, buffer, buffer spring, right side bolt release, left side ambi magazine release, bolt catch screw included.. WARNINGS:
      • Will not work with solid filled 9mm bolt carrier
      • VERT TM buffer system is designed for 5.56/.223 direct gas impingement system 
      • Use of NICKLE BORON Bolt Carrier may cause damage to the buffer system due to the I.D. (Inside Diameter) of the BCG being undersized
      • Inside, rear cavity of the bolt carrier must be .625" diameter x .625" deep minimum to clear the buffer.  Damage may occur if proper clearance isn't met.
      • NOTE: The BAD-PDW(tm), BAD-CSS(tm) and Ultra Compact Pistol SABERTUBE® using the patented VERT® buffer system have been tested on industry standard, factory Colt 6920 (direct impingement) to be a drop-in stock system using factory 5.56/.223 ammunition. However, due to the limitless possible configurations of the AR-15 rifle system from aftermarket components and the variety of ammunition used, the rifle may be under gassed for the VERT® buffer system. Some adjustments or modification may be required. The most common adjustment if the bolt fails to lock back on the last round is to open the barrel gas port diameter to increase the gas into the system to fully cycle and compress the inner buffer spring for reliable operation. An adjustable gas block, adjustable gas key or adjustable bolt carrier is recommended for tuning the gas system.

        The VERT® buffer system have been tested successfully with 300BLK direct impingement AR platforms in semi-auto and full-auto fire. However, the rifle system must be configured properly. 300BLK supersonic and 300BLK subsonic ammunition have drastically different characteristics. They will also perform differently suppressed and unsuppressed. The rifle may be tuned to function on one end of the spectrum or the other. Please do not expect the stock to run on the same rifle configuration between shooting suppressed vs. unsuppressed and supersonic vs. subsonic.

        The system should be configured, installed and function checked by a qualified gunsmith for reliable and safe operation.

        FEDERAL FIREARMS LICENSE REQUIRED - Please have your dealer email a signed copy of their FFL License to FFL@battlearmsdevelopment.com or FAX to 702.948.4472 and reference your name & order # to avoid any delays in processing.

         

         

    Learn More
  2. BAD-PDW Monolithic PDW Lower Receiver + VERT Stock System

    Regular Price: $975.00

    Special Price $899.00


    VERT TM PDW Lower - MODEL: BAD-PDW Monolithic PDW Lower Receiver + Stock System

    • Monolithic Design
    • Continous Cheek Weld
    • Self-Contained Ultra Compact Buffer System 
    • No Special BCG Required!  *Compatible with MilSpec M16 Bolt carrier*
    • Ultra Compact Stock System 4.75" Long Fully Collapsed, 8.75" Long Fully Extended
    • Built-in Ambidextrous Bolt Release
    • Built-in Ambidextrous Magazine Release
    • Multiple Patents Pending
    • Download PDF Flyer 

    Complete Lower Receiver Set (Less Trigger Group) - See detailed description for complete list

    WARNINGS:

    • Will not work with solid filled 9mm bolt carrier
    • VERT TM buffer system is designed for 5.56/.223 direct gas impingement system 
    • Use of NICKLE BORON Bolt Carrier may cause damage to the buffer system due to the I.D. (Inside Diameter) of the BCG being undersized
    • Inside, rear cavity of the bolt carrier must be .625" diameter x .625" deep minimum to clear the buffer.  Damage may occur if proper clearance isn't met.

    • NOTE: The BAD-PDW(tm), BAD-CSS(tm) and Ultra Compact Pistol SABERTUBE® using the patented VERT® buffer system have been tested on industry standard, factory Colt 6920 (direct impingement) to be a drop-in stock system using factory 5.56/.223 ammunition. However, due to the limitless possible configurations of the AR-15 rifle system from aftermarket components and the variety of ammunition used, the rifle may be under gassed for the VERT® buffer system. Some adjustments or modification may be required. The most common adjustment if the bolt fails to lock back on the last round is to open the barrel gas port diameter to increase the gas into the system to fully cycle and compress the inner buffer spring for reliable operation. An adjustable gas block, adjustable gas key or adjustable bolt carrier is recommended for tuning the gas system.

      The VERT® buffer system have been tested successfully with 300BLK direct impingement AR platforms in semi-auto and full-auto fire. However, the rifle system must be configured properly. 300BLK supersonic and 300BLK subsonic ammunition have drastically different characteristics. They will also perform differently suppressed and unsuppressed. The rifle may be tuned to function on one end of the spectrum or the other. Please do not expect the stock to run on the same rifle configuration between shooting suppressed vs. unsuppressed and supersonic vs. subsonic.

      The system should be configured, installed and function checked by a qualified gunsmith for reliable and safe operation.

      FEDERAL FIREARMS LICENSE REQUIRED - Please have your dealer email a signed copy of their FFL License to FFL@battlearmsdevelopment.com or FAX to 702.948.4472 and reference your name & order # to avoid any delays in processing.

       

       

      Learn More
  3. ULTRA COMPACT PISTOL SABERTUBE + VERT BUFFER SYSTEM - COMBO
    $225.00

    Battle Arms Development's latest ULTRA COMPACT PISTOL SABERTUBE® and  VERT® BUFFER SYSTEM COMBO!
    (For Direct Impingement Gas AR15 Systems in .223/556 or 300BLK) 
    Includes:
    (1) SABERTUBE® Receiver Extension/Buffer Tube - Functional, clean and elegant dimpled pattern design.  The most unique buffer tube on the market!  

    • Only 4.75" Overall Installed (from rear of receiver)
    • Compatible with the ultra compact VERT® BUFFER SYSTEM only
    • Precision CNC from billet 6061 Aircraft Grade Aluminum
    • MilSpec Type III Class 2 Hard Anodized Black
    • Unique, Lightweight and Functional Dimpled Pattern Design
    • Fits Mil-Spec Compatible AR15 Lower Receivers.
    • Lightweight design eliminated the need for Castle Nut
    • Made in the USA

    (1) VERT® BUFFER SYSTEM

    • Complete Buffer System with Springs
    • Compatible with Mil-Spec M16 Bolt Carrier
    • US Patent No. 9,395,148
    • 3.9 oz Overall Weight
    • Made in the USA

    (1) BAD-QDEP-B - QD END PLATE

    • Billet 7075T6 Aluminum
    • MilSpec Type III Class 2 Hard Anodized Black
    • Built-In Non-Rotating OQ<
    • Made in the USA


    NOTE: The BAD-PDW(tm), BAD-CSS(tm) and Ultra Compact Pistol SABERTUBE® using the patented VERT® buffer system have been tested on industry standard, factory Colt 6920 (direct impingement) to be a drop-in stock system using factory 5.56/.223 ammunition. However, due to the limitless possible configurations of the AR-15 rifle system from aftermarket components and the variety of ammunition used, the rifle may be under gassed for the VERT® buffer system. Some adjustments or modification may be required. The most common adjustment if the bolt fails to lock back on the last round is to open the barrel gas port diameter to increase the gas into the system to fully cycle and compress the inner buffer spring for reliable operation. An adjustable gas block, adjustable gas key or adjustable bolt carrier is recommended for tuning the gas system.

    The VERT® buffer system have been tested successfully with 300BLK direct impingement AR platforms in semi-auto and full-auto fire. However, the rifle system must be configured properly. 300BLK supersonic and 300BLK subsonic ammunition have drastically different characteristics. They will also perform differently suppressed and unsuppressed. The rifle may be tuned to function on one end of the spectrum or the other. Please do not expect the stock to run on the same rifle configuration between shooting suppressed vs. unsuppressed and supersonic vs. subsonic.

    The system should be configured, installed and function checked by a qualified gunsmith for reliable and safe operation.

    Learn More
  4. VERT STOCK SYSTEM - PDW STOCK

    Regular Price: $425.00

    Special Price $399.00


    Battle Arms Development's latest VERTTM STOCK SYSTEM  ONLY 19.5oz!

    WARNINGS:

    • Will not work with solid filled 9mm bolt carrier
    • VERT TM buffer system is designed for 5.56/.223 direct gas impingement system. Will also work on 300BLK DI system as well but must have appropriate gas port size. 
    • Use of NICKLE BORON Coated Bolt Carrier may cause damage to the buffer system due to the I.D. (Inside Diameter) of the BCG being undersized
    • Inside, rear cavity of the bolt carrier must be .625" diameter x .625" deep minimum to clear the buffer.  Damage may occur if proper clearance isn't met
    • Download PDF Flyer 

    • NOTE: The BAD-PDW(tm), BAD-CSS(tm) and Ultra Compact Pistol SABERTUBE® using the patented VERT® buffer system have been tested on industry standard, factory Colt 6920 (direct impingement) to be a drop-in stock system using factory 5.56/.223 ammunition. However, due to the limitless possible configurations of the AR-15 rifle system from aftermarket components and the variety of ammunition used, the rifle may be under gassed for the VERT® buffer system. Some adjustments or modification may be required. The most common adjustment if the bolt fails to lock back on the last round is to open the barrel gas port diameter to increase the gas into the system to fully cycle and compress the inner buffer spring for reliable operation. An adjustable gas block, adjustable gas key or adjustable bolt carrier is recommended for tuning the gas system.

      The VERT® buffer system have been tested successfully with 300BLK direct impingement AR platforms in semi-auto and full-auto fire. However, the rifle system must be configured properly. 300BLK supersonic and 300BLK subsonic ammunition have drastically different characteristics. They will also perform differently suppressed and unsuppressed. The rifle may be tuned to function on one end of the spectrum or the other. Please do not expect the stock to run on the same rifle configuration between shooting suppressed vs. unsuppressed and supersonic vs. subsonic.

      The system should be configured, installed and function checked by a qualified gunsmith for reliable and safe operation.

     

     

    Learn More
  5. SABERTUBE (Mid Length) / BAD-LBS Lightweight Stock COMBO

    Regular Price: $176.95

    Special Price $165.00

    Out of stock

    Battle Arms Development's latest SABERTUBE (Mid Length) / BAD-LBS Lightweight Stock COMBO!  ONLY 6.8 oz!

    Note:  Compatible only with Lower Receivers with CAPTIVE Rear Takedown Ping Detent Spring such as the BAD556-LW Lower Receiver due to the lightweight design eliminating the End Plate and Castle Nut.


    Learn More
  6. SABERTUBE(tm) (Mid Length) / QD End Plate / BAD-LBS Lightweight Stock COMBO

    Regular Price: $199.95

    Special Price $179.99

    Out of stock

    Battle Arms Development's latest SABERTUBETM (Mid Length) / QD End Plate / BAD-LBS Lightweight Stock COMBO!  ONLY 6.9 oz!  Works with all MilSpec compatible AR15 Lower Receivers. 



    Learn More
  7. SABERTUBE(tm) (Rifle Length) / QD End Plate / BAD-LBS Lightweight Stock COMBO

    Regular Price: $215.00

    Special Price $199.00

    Battle Arms Development's latest SABERTUBETM (Rifle Length) / QD End Plate / BAD-LBS Lightweight Stock COMBO!  ONLY 7.5 oz!  Works with all MilSpec compatible AR15 Lower Receivers. 



    Learn More
  8. SABERTUBE(tm) PISTOL TUBE & QD End Plate COMBO

    Regular Price: $119.00

    Special Price $109.00

    Out of stock

    Battle Arms Development's latest SABERTUBE (tm) *PISTOL* Receiver Extension/Buffer Tube & QD End Plate COMBO!  Works with all MilSpec compatible AR15 Lower Receivers and standard Carbine Buffer & Carbine Buffer Spring.



    Learn More
  9. BAD-LBS-MIL Lightweight Butt Stock + 6 Pos. MilSpec Buffer Tube Combo

    Regular Price: $114.95

    Special Price $99.95

    Battle Arms Development's latest Lightweight Butt Stock (BAD-LBS-MIL) with Mil-Spec 6 Position Carbine Length Buffer Tube (AR15RE-MIL-6C) Combo!  Clean, beautiful, no nonsense, minimalistic design!


    Learn More
  10. AR15RE-MIL-6C Mil-Spec 6 Position Carbine Receiver Extension

    Regular Price: $39.95

    Special Price $32.00

    Mil-Spec Receiver Extension / Buffer Tube, 6 Position

    Features:

    • Mil-Spec Carbine Length Receiver Extension / Buffer Tube
    • 6 Positions
    • Precision CNC from 7075T6 Aircraft Grade Aluminum Impact Forging
    • MilSpec Type III Class 2 Hard Anodized Black
    • Made in the USA

    Note: Buffer, Buffer Spring, Castle Nut, and End Plate are not included.

     


    Learn More

Grid List

Set Descending Direction

1-10 of 18

Page:
  1. 1
  2. 2