Upper/ Lower Receivers

Upper/ Lower Receivers

Grid List

Set Descending Direction

1-10 of 18

Page:
  1. 1
  2. 2
  1. BAD556-LW Lightweight 7075-T6 Billet Receiver Set

    Regular Price: $549.00

    Special Price $499.00

    Battle Arms Development, Model BAD556-LW Lightweight Billet Receiver Set in 7075-T6 Aircraft Grade Aluminum.  Patents Pending.

    INTRODUCTORY PRICE SPECIAL!

    FEDERAL FIREARMS LICENSE REQUIRED | **PLEASE REFER TO FOOTNOTES BEFORE PURCHASING 

    Learn More
  2. BAD556-LW Lightweight 7075-T6 Billet Lower Receiver

    Regular Price: $289.95

    Special Price $269.00

    Battle Arms Development, Model BAD556-LW Lightweight Billet Lower Receiver in 7075-T6 Aircraft Grade Aluminum.  Patent Pending.

    FEDERAL FIREARMS LICENSE REQUIRED

    Learn More

  3. BAD556-LW Lightweight 7075-T6 Billet Upper Receiver
    $259.95


    Battle Arms Development, Model BAD556-LW Lightweight Billet Upper Receiver in 7075-T6 Aircraft Grade Aluminum.  Patent Pending. 
    NEW GEN 2!  LIGHTER & NOW COMPATIBLE WITH FORTIS REV II Rails.


    Learn More
  4. Stripped BAD-PDW Monolithic PDW Lower Receiver + VERT® Stock System

    Regular Price: $750.00

    Special Price $699.00

    STRIPPED - VERT®PDW Lower - MODEL: BAD-PDW Monolithic PDW Lower Receiver + Stock System

  5. Monolithic Design
  6. Continous Cheek Weld
  7. Self-Contained Ultra Compact Buffer System
  8. No Special BCG Required!  *Compatible with MilSpec M16 Bolt carrier*
  9. Ultra Compact Stock System 4.75" Fully Collapsed, 8.75" Fully Extended
  10. Built-in Ambidextrous Bolt Release
  11. Built-in Ambidextrous Magazine Release
  12. Proprietary Buffer, Buffer Spring and Stock Components Included
  13. Multiple Patents Pending
  14. Proprietary stock assembly, buffer, buffer spring, right side bolt release, left side ambi magazine release, bolt catch screw included.

    FEDERAL FIREARMS LICENSE REQUIRED - Please have your dealer email a signed copy of their FFL License to FFL@battlearmsdevelopment.com or FAX to 702.948.4472 and reference your name & order # to avoid any delays in processing.

     
    Learn More
  • BAD-PDW Monolithic PDW Lower Receiver + VERT® Stock System

    Regular Price: $975.00

    Special Price $899.00


    VERT TM PDW Lower - MODEL: BAD-PDW Monolithic PDW Lower Receiver + Stock System

    • Monolithic Design
    • Continous Cheek Weld
    • Self-Contained Ultra Compact Buffer System 
    • No Special BCG Required!  *Compatible with MilSpec M16 Bolt carrier*
    • Ultra Compact Stock System 4.75" Long Fully Collapsed, 8.75" Long Fully Extended
    • Built-in Ambidextrous Bolt Release
    • Built-in Ambidextrous Magazine Release
    • Multiple Patents Pending
    • Download PDF Flyer 

    Complete Lower Receiver Set (Less Trigger Group) - See detailed description for complete list

    WARNINGS:

    • Will not work with solid filled 9mm bolt carrier (See 9mm VERT Buffer)
    • VERT® buffer system is designed for 5.56/.223 direct gas impingement system 
    • Use of NICKLE BORON Bolt Carrier may cause damage to the buffer system due to the I.D. (Inside Diameter) of the BCG being undersized
    • Inside, rear cavity of the bolt carrier must be .625" diameter x .625" deep minimum to clear the buffer.  Damage may occur if proper clearance isn't met.

    • NOTE: The BAD-PDW™, BAD-CSS™ and Ultra Compact Pistol SABERTUBE® using the patented VERT® buffer system have been tested on industry standard, factory Colt 6920 (direct impingement) to be a drop-in stock system using factory 5.56/.223 ammunition. However, due to the limitless possible configurations of the AR-15 rifle system from aftermarket components and the variety of ammunition used, the rifle may be under gassed for the VERT® buffer system. Some adjustments or modification may be required. The most common adjustment if the bolt fails to lock back on the last round is to open the barrel gas port diameter to increase the gas into the system to fully cycle and compress the inner buffer spring for reliable operation. An adjustable gas block, adjustable gas key or adjustable bolt carrier is recommended for tuning the gas system.

      The VERT® buffer system have been tested successfully with 300BLK direct impingement AR platforms in semi-auto and full-auto fire. However, the rifle system must be configured properly. 300BLK supersonic and 300BLK subsonic ammunition have drastically different characteristics. They will also perform differently suppressed and unsuppressed. The rifle may be tuned to function on one end of the spectrum or the other. Please do not expect the stock to run on the same rifle configuration between shooting suppressed vs. unsuppressed and supersonic vs. subsonic.

      The system should be configured, installed and function checked by a qualified gunsmith for reliable and safe operation.

      FEDERAL FIREARMS LICENSE REQUIRED - Please have your dealer email a signed copy of their FFL License to FFL@battlearmsdevelopment.com or FAX to 702.948.4472 and reference your name & order # to avoid any delays in processing.

       

       

      Learn More
  • BAD556-LW Lightweight 7075-T6 Billet Receiver Set - CERAKOTE FDE

    Regular Price: $625.00

    Special Price $565.00

    Battle Arms Development, Model BAD556-LW Lightweight Billet Receiver Set in 7075-T6 Aircraft Grade Aluminum - CERAKOTE MAGPUL FDE.  Patents Pending.  

    ***PLEASE ALLOW 5 TO 10 BUSINESS DAYS FOR PROCESSING***

    FEDERAL FIREARMS LICENSE REQUIRED | **PLEASE REFER TO FOOTNOTES BEFORE PURCHASING 

    Learn More
  • BAD556-LW Lightweight 7075-T6 Billet Receiver Set - Cerakote MAGPUL OD GREEN

    Regular Price: $625.00

    Special Price $565.00

    Battle Arms Development, Model BAD556-LW Lightweight Billet Receiver Set in 7075-T6 Aircraft Grade Aluminum - CERAKOTE MAGPUL FDE.   

    FEDERAL FIREARMS LICENSE REQUIRED | **PLEASE REFER TO FOOTNOTES BEFORE PURCHASING 

    ***RECEIVERS ARE CUSTOM CERAKOTE TO ORDER - PLEASE ALLOW 7-10 BUSINESS DAYS FOR PROCESSING***

    Learn More
  • 80% AR15 Style Premium Forged Lower Receiver - Wire EDM Magwell - Hard Anodized Black

    Regular Price: $145.00

    Special Price $135.00

    80% AR-15 Style, Forged 7075-T6 Premium Lower Receiver with Wire EDM Machined Magwell.  Type III Hard Anodized Black.  Made from the same aluminum forging and machining methods as our famous BAD-15 Preminum Forged Receivers.

    ***NOT A FIREARM***Shipped with ATF Determination Letter***

    Learn More
  • BAD-15 Premium Forged Lower Receiver - GEN 2
    $209.00

    BAD-15 GEN 2 Forged 7075-T6 Premium Lower Receiver with Wire EDM Magwell

    FEDERAL FIREARMS LICENSE REQUIRED

    Learn More
  • BAD-15 Premium Forged Lower Receiver GEN 2 - Magpul FDE Cerakote Finish

    Regular Price: $249.00

    Special Price $229.00


    BAD-15 Forged 7075-T6 Premium Lower Receiver with Wire EDM Magwell - MAGPUL FDE CERAKOTE FINISH

    FEDERAL FIREARMS LICENSE REQUIRED | **PLEASE REFER TO FOOTNOTES BEFORE PURCHASING 

    Learn More
  • Grid List

    Set Descending Direction

    1-10 of 18

    Page:
    1. 1
    2. 2