450.00 450.00 450.0 USD


    This combination does not exist.

    Add to Cart



    • 9MM Version Compatible with most 9MM blow-back Bolt Carrier Groups (i.e. QC10, NFA, FAXON, etc.) 

    • Continuous Cheek Rest for Stable Shooting

    • Interchangeable Cheek Rest (different colors/patterns, coming soon)

    • Patented Ultra Compact Buffer & Buffer Spring

    • Fully Collapsed Length = 4.8in

    • Fully Extended Length = 8.8in

    • (3) Three User Adjustable Stock Extension Options:

      • (2) Position Quick Release (Straight Pull to Open & Depress Latch to Close)

      • (2) Position Lock (Depress Latch to Open & Close

      • (5) Position Lock (Depress Latch to Each of the 5 Positions) 

    • (2) QD Sling Swivel Points on Butt Plate

    • High Impact Resistant S7 Tool Steel Guide Rods 

    • Intelligent Guide Rod Lock Design   

    • Lightweight 19 Ounces (Complete Stock System with Buffer & Springs)

    • Billet 7075T6 Aluminum CNC Machined Butt Stock & Stock Housing for Ultimate Durability

    • MilSpec Type III Class 2 Hard Anodized Black Finished Housing and Buttplate

    • Total Stock System Weight 19 oz (Including Buffer, Spring, etc.)

    • Buffer Weight = 5.56 3.9 oz / 9MM 5.7oz

    • Made in the USA

    • U.S. Patents #9341437, #9395148, Other Patents Pending


    The system should be configured, installed and function checked by a qualified gunsmith for reliable and safe operation.  VERT® buffer system is designed for 5.56mm/.223 direct gas impingement systems. 

    Will also work on the 300BLK DI system as well but must have an appropriate gas port size. 

    The patented VERT® buffer system has been tested on industry-standard, factory Colt 6920 (direct impingement) to be a drop-in stock system using factory 5.56/.223 ammunition.

    However, due to the limitless possible configurations of the AR-15 rifle system from aftermarket components and the variety of ammunition used, the rifle may be under-gassed or over-gassed for the VERT® buffer system. Some adjustments or modifications may be required. 

    The most common adjustment if the bolt fails to lock back on the last round is to open the barrel gas port diameter to increase the gas into the system to fully cycle and compress the inner buffer spring for reliable operation. An adjustable gas block, adjustable gas key, or adjustable bolt carrier is recommended for tuning the gas system.

    The VERT® buffer system has been tested successfully with 300BLK direct impingement AR platforms in the semi-auto or full-auto fire. However, the rifle system must be configured properly. 300BLK supersonic and 300BLK subsonic ammunition have drastically different characteristics.

    They will also perform differently suppressed and unsuppressed. The rifle may be tuned to function on one end of the spectrum or the other. Please do not expect the stock to run on the same rifle configuration between shooting suppressed vs. unsuppressed and supersonic vs. subsonic.

    This is a preview of the recently viewed products by the user.
    Once the user has seen at least one product this snippet will be visible.

    Recently viewed Products